How does a fire blanket put out a fire?

 Fire blankets are one of the most vital safety equipment required in any industry.  Fire can break out anywhere anytime.  A small short circuit is enough for the quick spread of fire. Therefore it is necessary to equip buildings with safety amenities.

Fire Blankets are made by using fire resistant materials which helps in immediately putting out the flame. They are manufactured using glass fibre fabric and retardant film. There are two layers of woven glass fibre in the blanket with the retardant film placed inside. In order to extinguish fire effectively it is important to use high quality fire blankets. Bright Weld Middle East FZE the leading industrial equipment supplier in Dubai offers premium quality fire blankets for industrial uses.  Bright Weld is renowned and trusted as the best fire blanket supplier Dubai.

Working of the fire blanket and how to use it effectively

Immediate action is required when you hear a fire alarm or notice a fire. There is no time to wait and read instructions about the usage of fire blankets. Therefore proper knowledge beforehand is essential. Fire blankets should be properly marked and kept in easily accessible areas.  Proper education on where it is placed and how it is to be used has to be given to the occupants of a building.

When you see or hear the first signs of a fire the foremost thing which you have to do is to turn off the electricity and gas supply. After you have done this, next you have to find the place or the source of the fire.  After spotting the source of fire you have to instantly take out the fire blankets.  As per your requirement you can choose its number.  After removing it from the containers you have to hold it properly using the straps on the blanket. Once this is done you have to check what you are wearing before going to extinguish the flame.  If the cloth you are wearing have high chance of catching fire take precautions (like rolling the sleeves, removing the coats etc).  Also wear inflammable gloves in your hands if they are not readily available cover your hands with the corners of the blanket.  After taking the necessary precautions take the fire blanket to the source of fire and cover the flames using the blanket.  Remember to bring along any immediately available person with you.  They will not only help you to be more confident but also will assist you in case of any emergency.  

Oxygen supply is instantly stopped by the fire blanket.  Oxygen supports fire therefore cutting it off immediately extinguishes the flame.  After placing the fire blanket be cautious not to touch the blanket or any other things near it.  It is advisable to stand a little far away from it.

If you find the fire to be uncontrollable and immense, exit the place instantly and get support from the fire brigade.

Usually employed to extinguish small fires, fire blankets are also used to drape around a person who have caught fire. Fire blankets immediately put out the fire caught by a person. By wrapping the fire blanket a person who has been trapped in the midst of the fire can be evacuated safely from a burning building.

Bright Weld Middle East FZE, fire blanket supplier Dubai is committed to provide customers with superior products and distinctive service. For buying superior quality fire blankets get in touch with us immediately.

Gas-Cutting: Process, Safety & Advantages

 Oxy-fuel cutting is widely employed for Industrial thermal cutting as the process can cut thicknesses from 0.5 mm- 250 mm and the equipment is not expensive and can be used mechanized or manually. This process uses an oxidizing flame and a gas-cutting torch to weld or cut. So what do you think an oxy- fuel cutting is? It involves the thermal cutting using oxygen & fuel gas (propane, acetylene, propylene, MAPP or natural gas) to cut materials. This process is also said to be as rapid & controlled rusting. Currently, there are many options in nozzle design & fuel gas types, which enhance the cutting speed & quality. So make sure to buy the gas cutting equipments, Dubai from a reliable supplier in the market.

Oxy- fuel Cutting Process       

Different materials have different ignition temperatures. For steel, this is about 7000C- 9000C. Initially, the oxygen-fuel mixture is used to preheat the metal to its ignition temperature (below its melting point). Then a jet of pure O2 is directed to the preheated section, which leads to an exothermic reaction between the metal & oxygen to form slag (iron oxide). The jet of O2 removes the slag and pierce through the material to cut the material further down.

Oxy-fuel process can be employed only for those metals whose oxides have low melting points than the base metal. Because when the metal starts to oxidize, it forms a protective crust and terminates the process. Therefore oxy-fuel process is only used for cutting low carbon steel and some low alloys which obey the above condition. This method can be used to cut thicker materials and allows cutting of steeper angles up to 700.

The Characteristics of a Quality Oxy- fuel cut

1. Clean smooth surface with near vertical drag lines
2. No under cuts
3. Cut face square with respect to top surface
4. Square top corner with minimum radius
5. Little/no slag on bottom edge which can be easily removed by scraping 

Gas Cutting Efficiency

Gas cutting efficiency is related to the speed of the cutting torch and the smoothness of the cut edge. When the speed is more, the cut edge will be coarser. Make a deal, only with the reliable welding accessories suppliers in UAE for a smooth and efficient process.

Gas cutting equipment

There are different types and varieties of gas cutting equipments for normal and specific functions in the industry. Most of them are designed and manufactured for the convenience of the work. Find high quality and certified gas cutting equipments, Dubai for long tern use and easy maintenance. You can read the list of wide range of gas cutting equipments below.

• Pressure Regulator, to regulate the pressure of the gas in the cylinder during the cutting process.
• Gas Cutters
• Gas cylinders
• Gas cutting Nozzles
• Pug Cutting Machine
• Gas cutting/Welding Torch
• Non-Return valve
• Flash Back Arrestor
• Industrial Gas Manifold system
• Flow meter
• CO2 Constant Pre- heater
• Pressure Tester
• Hose Connector
• Rubber Hose for welding
• Goggles and glasses
• Gloves and Apron
• Spark Lighter and spanners
• Chipping hammer and wire brush                      

Advantages of Oxy- Fuel Gas Cutting

Gas cutting is popular because of its advantages than a normal and plasma type of metal cutting processes. So what are the advantages of oxy- fuel gas cutting process.

1. Oxy- fuel cutting has high cutting quality with a relatively high cutting speed (+20 % with acetylene).
2. Low cost option (low capital cost & low consumable cost) than other cutting processes.
3. This process requires no electricity.
4. Oxy- fuel gas cutting can be done manually or mechanized.
5. The process can be used to cut thick materials and the equipments are easily transportable.

Gas- Cutting safety Precautions

All cutting and welding processes have to be safely handled. Oxy- fuel cutting/ gas Cutting involves the cutting & welding of metals using fuel gases. These tasks have risks, so those who work on cutting industry need to follow safety rules and guidelines to maintain a safe workplace.

• Provide fire protection equipments like fire extinguishers at the workplaces.
• Use personal protections during gas cutting against fume inhalation, eye injuries, Bodily injuries or other ergonomic risks.
• Follow the safety guidelines for proper maintenance of gas cylinders and Hoses
• All cutting equipment should be made grease and oil free as there is a possible hazard for explosion if O2 interacts with petroleum.
• Make sure to clean the Gas Cutting Torch tips before lighting.
• Use friction lighters to ignite torches.

Bright Weld Middle East FZE is a leading supplier of Gas Cutting Equipments, Dubai which is highly engaged in the industries of welding, safety, oil & gas. We provides premium gas cutting equipments which are well- designed and meets all the quality standards and supplied under perfect maintenance. We provide 24/7 customer service for the better maintenance and functionality of our products. Bright Weld, welding accessories suppliers in UAE ensure you an incredible work support and flawless functioning with our highly reviewed industrial gas cutting & welding equipments.

What is the difference between pipe cutting and beveling?

 Its name comes from the fact that it is used to cut pipes. It's an onsite machining operation that cuts pipe in order to link it to a new pipe. For sectors such as petrochemicals and oil and gas, it is a highly important maintenance and repair process. This also aids in the maintenance of a corroding pipe. We employ cold cutting techniques to assure safety during plant maintenance or closure because industries like oil, gas, and petrochemicals are prone to explosions. Following pipe cutting, pipe beveling is performed. It's regarded as a final touch. The pipe can be ergonomically positioned with beveling to give joint-integrity with a new pipe. The technique softens the sharp-cut open edges, making them easier to handle.

What role do automated cold pipe cutting and beveling tools play?

When compared to conventional tools;

Automated beveling tools save time and produce consistently accurate results.

Ergonomic concerns are no longer a factor in human error.

It requires less labor to operate and is safer to do so.

In an explosive atmosphere, cold cutting and beveling assure fire safety.

What are the applications of these devices?

During plant maintenance and shutdowns, pipe cutting is routinely performed. They're used in a variety of industries, including oil, gas, and petrochemicals. Flange resurfacing, pipe squaring and severing, counterbore machining, airport fuel line piping repair, desalination plant pipe severing and beveling, OD shaft turning, food processing plant pipe severing and beveling, industrial pipe replacement, weld cap removal, trepanning, cutting HDPE piping, offshore caisson cutting, pipe grooving, casing abandonments, vessel machining, pipeline distribution, valve replacement, and municipal

We supply which brands of beveling machines and pipe cutting machine in UAE?

Mathey Dearman takes great pleasure in being the world's leading authority on pipe preparation for welding. They've been designing and producing pipe and tubing cutting and beveling machines, as well as clamping, aligning, and reforming systems, since the 1930s. They've also produced other important tools and equipment over time. Measuring and layout tools, gauges, and inspection equipment are among these items. Mathey Dearman amalgamated with B&B Pipe and Industrial Tools LLC and TAG Pipe Equipment Specialist Ltd in October of 2019. While the strong brand names will remain, the new firm will be known as The S.F.E. Group, or Specialized Fabrication Equipment Group.

G.B.C Italy –

Pipe cutters, plate bevelling machines, pipe bevellers, flange facing machines, and other similar machines are available. Our metal pipe and plate working products include a wide range of machinery and accessories for use in a variety of industries. Find excellent quality pipe cutting machine in UAE at Bright Weld for every type of industrial projects.

we are listed as one of the premium welding accessories suppliers in UAE. To get the best pipe cutting machine in UAE and to know more about our services, visit https://www.bwsme.com/ and connect with us.